DR. KHANDKAR AFTAB HOSSAIN
Professor
Mechanical Engineering
- +8801714087345
- aftab@me.kuet.ac.bd
- SSC from Model High(Multi) School, Khulna.1975
- HSC Govt. B.L.College, Daulatpur, Khulna.1977
- BSC in Mechanical Engineering from KUET (1981)
- M.Sc. Engg. in Mechanical Engineering from BUET 1990
- Ph.D. Engg. in Mechanical Engineering from IIT, Kharagpur, India 1997
Fluid Dynamics
- M. M. Kamal Uddin, M. Shahidul Islam and Khandkar Aftab Hossain, “ Effect of Reynolds Numbers on Fluid Flow and Heat Transfer Characteristic Over a Rectangular Prism in Uniform Flow”, ISESCO Science and Technology Vision, Vol. 5, No. 8, November 2009, pp/35-39
- Shamima Akter and Khandkar Aftab Hossain, “Flow Characteristics of Round Air Jet over a Rectangular Cavity.”, ISESCO Science and Technology Vision, Vol. 6, No. 9, May 2010, pp/70-74.
- M. R. Asif, M. S. Hossain and K. A. Hossain, “Heat Transfer in a Rectangular Enclosure with Baffles.” ARPN Journal of Engineering and Applied Sciences, Vol. 6, No. 4, April 2011, ISSN 1819-6608, pp/29-41
- M.I. Haque and K.A. Hossain,” Free Convection Heat Transfer from Heated Object in a Container”,ISESCO Science and Technology Vision, Vol. 7, No. 11, May 2011, pp/64-70.
- Md. Golam Kader and Khandkar Aftab Hossain,” Free Convective Heat Transfer From an Object at Low Rayleigh
Number”, Journal of Mechanical Engineering, Vol. ME 43, No. 1, June 2013,Transaction of the Mech.
Eng. Div., The Institution of Engineers, Bangladesh, pp/23-28.
- Hossain, K.A. and Arora, R.C, “Laminar Heated Slot Jet Impinging On a Flat Plate Including Buoyancy
Effects ”, Proc. of Seminar on Fluid Mechanics Research, December 27-28, pp 155-164, 1995, Dhaka,
Bangladesh. - Arora, R.C. and Hossain, K. A., “ Heat Transfer Characteristics of a Heated Laminar Offset
Slot Jet ”, Proc. of third ISHMT-ASME Heat and Mass Transfer Conference and Fourteenth HMTC
national Heat and Mass Transfer conference, December, 29 – 31, pp/667-672, 1997, IIT, Kanpur,
INDIA. - Hossain, K.A. and Arora, R.C. “ Flow Characteristics of Laminar Slot Jet Impinging Over a Cylinder”,
Proc. of Fourth Annual Paper Meet APM’97 of the Mechanical Engineering Division, IEB, Paper No. - pp 51-59, 23-25 October, 1997, Bangladesh.
- Ahsan Reza Choudhuri, Khandkar Aftab Hossain and Md. Nawsher Ali , “Hybrid Fuel for Supersonic
Combustion Ram (SCRAM) Jet Combustion,” Proc. Of Fourth Annual Paper Meet APM’97 of the
Mechanical Engineering Division, IEB, Paper No. 32, pp 262-265, 23-25 October, 1997, Bangladesh. - Hossain, K. A. and Islam, M.Q., “Yaw Stability of a Horizontal Axis Downwind Turbine”, Proc. Of
National Seminar on Renewable Energy for Proverty Alleviation (NSREPA ’97) , Organized by Dhaka
Centre, Institution of Engineers, Bangladesh, pp 198-206, 28-30 October, 1997. - Hossain, K.A. and Arora, R.C., “Numerical Modeling of Laminar Free Axisymmetric Jet”, Proc. Of
Second International Seminar on Fluid Mechanics and Heat Transfer (ISFMHT-97), pp. 76-84,
December 17-18,1997. - Khandkar Aftab Hossain and Ramesh Chandra Arora, “ Numerical Modeling of Laminar Free Slot Jet
”, Proc. of 24th. National Conference on Fluid Mechanics and Fluid Power, Shibpur, INDIA, 26-28,
pp/ B-42 to B-47, December, 1997. - Hossain, K. A. “ Energy From Wind a Numerical Approach ”, Proc. Of A National Seminar on
Utilization of Renewable and Alternative Energy Sources for Sustainable Development, pp/101-116 ,
10-11, March, 1998.
- M. Sc. Thesis Title: “Study of the Yaw Stability of a Horizontal Axis Downwind
Turbine” [A complete numerical work based on FORTRAN language.] - Ph. D. Thesis Title: Laminar Slot Jet and Slot Jet Impingement Heat Transfer; Ph.
D. study has been completed on 26.5 1996 from IIT, Kharagpur, India. A complete
numerical work has been carried out in the field of Laminar Slot and axisymmetric jet
impingement. A series of problems is studied using two dimensional Navier-Stokes
equations and Energy equation. The numerical schemes are used for the solution
of the Navier-Stokes equations and Energy equation using SIMPLE, SIMPLER and SIMPLEC
- Cooling load estimation and ducting system design of the 2nd floor of the fitting shop, RUET under the supervision of Prof Rabiul Islam Sarker
- Served as a Lecturer in Mechanical Engineering Department of Khulna Engg.College, Khulna from 30/03/1983 to 30/6/1987.
- Served as an Assistant Professor in the Mechanical Engineering Department of B.I.T.,
Khulna from 01/7/1987 to 14/4/1998. - Served as an Associate Professor in the Mechanical Engineering Department of B.I.T.,
Khulna from 15/4/1998 to 30/9/2001. - Served as a Professor in the Mechanical Engineering Department of B.I.T., Khulna
from 01/10/2001 to 31/8/2003. - Served as a Professor in the Mechanical Engineering Department of Khulna University
of Engineering & Technology, Khulna from 01/9/2003 till to date - Served as Head of the Department in the Mechanical Engineering Department of B.I.T.,
Khulna from 01/10/2001 to 31/8/2003. - Served as Head of the Department in the Mechanical Engineering Department of
Khulna University of Engineering & Technology, Khulna from 01/9/2003 to 31/12/2003. - Served as Director (Student’s Welfare) in the Khulna University of Engineering &
Technology, Khulna from 01/03/2006 to 11/04/08. - Served as Dean of the Faculty of Mechanical Engineering of Khulna University of
Engineering & Technology, Khulna from March 01, 2010 to February 29, 2012. - Conducted undergraduate projects in Fluid Mechanics Laboratory in the University.
- Offers M.Sc. courses in the Department.
- Supervised Four M. Eng./M.Sc. projects in the Department.
- IEB, Member No. (F-5079), Central Council Member from Khulna Centre
for 2004-2005, Vice-Chairman for the period 2006-2008 and Chairman for the period 2012-2013.
